Project

General

Profile

Actions

Device #2

open
C(

Electrocardiograph Contec ECG1200G

Device #2: Electrocardiograph Contec ECG1200G

Added by Christoph (Obruni) 4 months ago. Updated 4 months ago.

Status:
Broken
Priority:
Normal
Assignee:
-

Description

Identification

Model: ECG1200G

12-channel Electrocardiograph is such a kind of electrocardiograph, which gathers 12-lead ECG signals simultaneously and prints out the ECG waveforms with thermal printing system.

Documentation

  1. Service Manual: https://tickets.chezo.africa/attachments/11

Issues

The device shows no signal when the electrode are on.

Description

  1. The device is switched on
  2. The cables are connected at the device
  3. At least, the big clips cables are connected to a living person (hand+foot)
  4. The device is set to measure something
  5. No changing signal is shown.

Investigation Results

  • The Sensor board is powered when the measurement is enabled.
  • Electricity can be measured at the connector to the cables.
  • All cables are checked using a Multimeter and showing a resistance less than 10 Ohm (as specified)

Images


Files

M33223EN.pdf (1.16 MB) M33223EN.pdf User Manual Christoph (Obruni), 08/15/2025 04:59 PM
PXL_20250815_151826465.MP.jpg (3.51 MB) PXL_20250815_151826465.MP.jpg Christoph (Obruni), 08/15/2025 05:35 PM
PXL_20250815_151523456.MP.jpg (4.06 MB) PXL_20250815_151523456.MP.jpg Christoph (Obruni), 08/15/2025 05:35 PM
PXL_20250815_174711030.MP.jpg (4.75 MB) PXL_20250815_174711030.MP.jpg Christoph (Obruni), 08/15/2025 07:57 PM
M33223EN.pdf
PXL_20250815_151826465.MP.jpg
PXL_20250815_151523456.MP.jpg
PXL_20250815_174711030.MP.jpg

C( Updated by Christoph (Obruni) 4 months ago Actions #2

C( Updated by Christoph (Obruni) 4 months ago Actions #3

  • Status changed from Running to Broken

RA Updated by Redmine Admin 4 months ago Actions #4

  • Subject changed from ECG1200G Electrocardiograph to Electrocardiograph Contec ECG1200G
  • Description updated (diff)
Actions

Also available in: PDF Atom